MIX AND CEMENT

MIX AND CEMENT

■ FIBERPLAST

■ MOLDABLE

CEMENTS

■ JOINT SEALER

FIBERPLAST

Fiberplast is a wet mix product consists of Bulk Fibers, refractory powders and binders. (Heat-hardening product)

FIBERPLAST 16
Color White
Max. Service Temperature(℃) 1600
Bulk Density 〔kg/m³) Before drying 1100
After firing at 110℃ 300
Loss on Ignition(%) 6.0
Remarks

MOLDABLE

Moldable is a wet mix product consists of Refractory ceramic fibers bulk dispersed in a sticky water-based refractory binder. (Heat-hardening product)

1600D MOLDABLE
Color White
Max. Service Temperature(℃) 1600
Bulk Density (kg/m³) Before drying 1300
After firing at110℃ 500
Loss on Ignition(%) 9

CEMENT

High-temperature cement for Fibermax product forms. Mainly used for Fibermax-to-Fibermax adhesion.
1600 CEMENT 1600MB CEMENT 1700D CEMENT
Color White White White
Max. Service Temperature(℃) 1600 1600 1700
Bulk Density(kg/m³) 1900 1100 1100
Solid Content(%) 70 34 40

JOINT SEALER

A putty-like material made of bulk fiber. Viscosity is adjusted to facilitate the sealant to fill the joints properly.

Pneumatic (air powered) caulking delivers a smooth, continuous bead of caulk, allowing an easy application.

Manual (hand)  caulking gun can be used for smaller applications.

Product Name Joint Sealer 16
Max. Service Temperature (°C) 1600
Bulk Density (kg/m³) before drying 1000
after drying 120
Linear  Shrinkage (%) at 1000°C×24h 0.3
at 1100°C×24h 0.7
Dry Shrinkage (%) 0
Loss on Ignition (%) 3

 

Joint Sealer 16 Quantity Applicator
1.8kg Cartridge 10 packs Pneumatic caulking gun
0.9kg Cartridge 10 packs Manual caulking gun

Packaging

FIBERPLAST 1600MB CEMENT 1600D MOLDABLE・

FMX16 CEMENT

1700D CEMENT
Standard

Size

15kg 5kg、20kg 5kg、15kg 4kg、15kg

Contact

【Call】

Branch Office: Overseas Department,
Tokyo, Osaka, Nagoya, Kyushu

Business hours: 9:00~17:15 tel+81-6-7711-5808

【Contact by e-mail】

e-mail

Same category

Use for same purpose