|
|
Isolite Mortars
| Features |
For effective installation of insulating firebricks, a wide variety of mortars are available from Isolite just to suit your needs with differences in material, and degree of density, and rate of porosity. |
| Kinds |
ASW (Wet) N-10, 12, 14, 15, and S-150
ASD (Dry) N-10, 12, 14, F-14, and F-30
SAS-W, D
HAS-W, D
MAS-W, D, DS
Board Mortars |
Combination with Insulating Firebricks
| Item |
Fineness (μm) |
Firebrick |
Setting Time (min.) |
Bonding Strength MPa(Kgf/cm2) |
After dried
at 105℃ |
After fired
at 1000℃ |
| ASW N-10 |
✓ |
B1 |
1 - 3 |
0.39 (4) |
0.69 (7) *1 |
| ASW N-12 |
✓ |
B4 |
1 - 3 |
0.39 (4) |
0.69 (7) |
| ASW F-14 |
✓ |
B5 |
1 - 3 |
0.69 (7) |
1.1 (11) |
| ASW F-15 |
✓ |
B7 |
1 - 3 |
1.6 (16) |
1.8 (18) |
| ASW S-150 |
✓ |
C1 |
1 - 3 |
1.8 (18) |
1.8 (18) |
| ASD N-10 |
✓ |
B1 |
1 - 3 |
0.59 (6) |
0.98 (10) *1 |
| ASD N-12 |
✓ |
B4 |
1 - 3 |
0.69 (7) |
0.78 (8) |
| ASD F-14 |
✓ |
B5 |
1 - 3 |
0.79 (8) |
0.89 (9) |
| ASD F-30 |
✓ |
LAP-165 |
1 - 3 |
1.2 (12) |
1.4 (14) |
| SAS-W |
✓ |
LBK-23 |
1 - 3 |
0.49 (5) |
0.69 (7) |
| SAS-D |
✓ |
LBK-23 |
1 - 3 |
0.49 (5) |
0.69 (7) |
| HAS-W |
✓ |
LBK-28 |
1 - 3 |
0.98 (10) |
1.1 (11) |
| HAS-D |
✓ |
LBK-28 |
1 - 3 |
0.79(8) |
1.2 (12) |
| MAS-W |
✓ |
ISO-COR |
1 - 3 |
2.5 (26) |
3.8 (39) |
| MAS-D |
✓ |
ISO-COR |
1 - 3 |
2.1 (21) |
3.4 (35) |
| MAS-DS (dry) |
✓ |
BAL-99 |
1 - 3 |
1.1 (11) |
1.4 (14) |
| Board Mortar (dry) |
✓ |
Silica Board |
1 - 3 |
0.39 (4) |
0.20 (2) *2 |
*1 With B2 firebrick *2 After firing at 500℃
Note) Time for adhesion means the elapse of the time after applying 2mm thickness mortar
between firebricks.
MAS-DS is thermoset type, all others are air-setting type.
Packing: 25kg per package. Wet type is packed in a can while dry type and board mortar are
in a paper bag.
Combination with Firebricks and Required Amount of Mortars
| Item |
Firebrick |
For joint sealing*1 |
Per 1000 standard bricks
(kg) |
Per 1m2 surface
(kg) |
| ASW N-10 |
A1, A2, B1, B2 |
260 - 300 |
5.4 – 6.2 |
| ASW N-12 |
A3, A4, B4 |
260 - 300 |
5.4 – 6.2 |
| ASW F-14 |
A5, A6, B5, B6, C1, C2 |
250 – 290 |
5.1 – 6.0 |
| ASW F-15 |
A7, B7, C3 |
250 – 290 |
5.1 – 6.0 |
| ASW S-150 |
C1, C2, C3 |
150 - 200 |
3.1 – 4.1 |
| ASD N-10 |
A1, A2, B1, B2 |
180 - 220 |
3.7 – 4.5 |
| ASD N-12 |
A3, A4, B4 |
180 - 220 |
3.7 – 4.5 |
| ASD F-14 |
A5, A6, B5, B6, C1, C2 |
170 - 210 |
3.5 – 4.3 |
| ASD F-30 |
LAP-165 |
160 -200 |
3.3 – 4.1 |
| SAS-W |
LBK-20, LBK-23 |
230 - 270 |
4.7 – 5.6 |
| SAS-D |
LBK-20, LBK-23 |
150 - 200 |
3.1 – 4.1 |
| HAS-W |
LBK-26, LBK-28, LBK-30, LBK-3000, LHB |
250 - 290 |
5.1 – 6.0 |
| HAS-D |
LBK-26, LBK-28, LBK-30, LBK-3000, LHB |
160 - 200 |
3.3 – 4.1 |
| MAS-W |
ISO-COR |
250 - 290 |
5.1 – 6.0 |
| MAS-D |
ISO-COR |
160 - 200 |
3.3 – 4.1 |
| MAS-DS (Dry) |
BAL-99, BAL-99M |
230 – 270 |
4.7 – 5.6 |
| Board Mortar (Dry) |
Silica Board, Super Board |
530 – 570*2 |
5.8 – 6.2 |
Note) *1 In the case of being applied to three surfaces of a brick, not including the back-up.
*2 Applied to standard board, 610X150X3mm
Note: Above figures are the average results of measuring and subject to variation.
Those figures should not be used for specification purposes.
|
